Overview of Prestige Auto Start System
The Prestige Auto Start System delivers a sleek, chrome‑finished design with a 5‑button 2‑way LCD transmitter. Offering up to 1 mile range, it supports 24‑hour, cold‑start, and auto modes, plus remote panic, valet lock, and intrusion alerts, all programmable via FlashLogic FLCART. All features
Product Design and Range
The Prestige Auto Start System showcases a refined chrome‑finished chassis that blends seamlessly with modern vehicle interiors. Its 5‑button 2‑way LCD transmitter offers clear, backlit feedback, confirming every command with a crisp visual cue. The unit supports a robust 1‑mile operating range, ensuring reliable connectivity even when parked at the edge of a driveway or in a large garage. The design incorporates a glass‑mounted antenna with an integrated LED light, providing instant visual confirmation of signal strength and a valet switch for quick lock‑in functionality. Internally, the system is built around FlashLogic FLCART‑compatible firmware, allowing for flexible programming and future updates. The transmitter’s ergonomic layout includes single, double, and triple‑press start options, selectable run times, and a parking meter countdown timer displayed on the LCD. Safety features such as remote panic, automatic arming, and intrusion alerts are integrated, while the system supports both single‑user and dual‑user profiles with separate control outputs. The overall architecture supports up to 11 NOC outputs and 19 control options, plus auxiliary outputs for additional accessories. With a limited lifetime warranty, the Prestige Auto Start System delivers both aesthetic appeal and functional versatility for the discerning vehicle owner. The unit’s compact footprint allows it to be mounted under the dash or in the glove compartment without obstructing existing controls. Its sleek silhouette and intuitive controls make it a standout addition to any vehicle’s accessory lineup. Users can program the system to remember multiple key codes, enhancing convenience for families today!
Key Features of the APS997Z Remote Start
The APS997Z offers a 5‑button 2‑way LCD transmitter, up to 1 mile range, 24‑hour, cold, auto start modes, remote panic, valet lock, intrusion alert, dual‑user profiles, and FlashLogic FLCART programming. and 11 NOC outputs; and 4 aux.?!
Two‑Way LCD Transmitter
The Prestige APS997Z transmitter is a 5‑button, 2‑way LCD device that confirms every command with a clear visual display. Its metal housing matches the system’s aesthetic while providing durability. The LCD screen shows the current state—locked, unlocked, or in start mode—allowing the user to verify actions before they occur. Each button is labeled for ease of use: start, lock, unlock, panic, and valet. The transmitter supports single or dual‑user profiles, enabling two distinct sets of codes that can be programmed via FlashLogic FLCART. Users can assign different functions to each profile, such as a “home” profile that starts the engine and unlocks the doors, and a “work” profile that only locks the vehicle. The device’s 1‑mile range is achieved through a built‑in glass‑mounted antenna that also features an LED indicator for power status; The LCD also displays selectable run times, allowing the user to set the engine to run for 30, 60, or 90 seconds, or to keep the vehicle running until manually stopped. In cold‑temperature mode, the transmitter automatically delays engine start until the engine reaches a safe operating temperature, preventing damage. The panic button triggers a 10‑tone siren and can be configured to send a remote alert to a mobile app via the telematics port. The transmitter’s design includes a valet switch that locks the doors when vehicle is parked, adding layer of security. All of these features are accessible through interface that requires no knowledge to operate today now soon now!.
Safety and Security Functions
The Prestige APS997Z system incorporates a comprehensive suite of safety and security features designed to protect the vehicle and its occupants. Automatic arming and locking engage immediately when the vehicle is parked, preventing unauthorized access. The system’s dual‑stage shock sensor detects sudden impacts and can trigger a remote siren or lock the doors if a collision is detected. A built‑in valet switch locks the doors when the vehicle is parked, ensuring that the keys cannot be removed while the car is unattended. Remote panic is available in all modes; pressing the panic button activates a 10‑tone siren and can send an alert to a connected mobile app via the telematics port. Intrusion detection is enabled through a memory‑based alarm that records the time and location of any forced entry, allowing owners to review events via the system’s log. The transmitter’s LCD confirms each action, providing visual confirmation that the vehicle is locked, unlocked, or in start mode. The system also supports a multi‑tone mini siren that can be customized for different alerts, such as a short tone for lock confirmation or a long tone for intrusion. All security functions are programmable through FlashLogic FLCART, allowing users to tailor the system to their specific needs. The APS997Z’s robust design and advanced features make it a reliable choice for vehicle owners seeking peace of mind. Enjoy the peace of mind it brings.
Convenience Modes
The Prestige APS997Z offers a range of convenience modes that enhance everyday use. The 24‑hour start mode allows the driver to set a start time up to 24 hours in advance, ensuring the engine warms up just before departure. The cold‑temperature start mode automatically engages the engine if the ambient temperature drops below a user‑defined threshold, protecting the battery and improving performance in harsh climates. An auto mode selects the optimal start time based on the vehicle’s schedule and user preferences. The system also supports selectable run times, letting the user choose how long the engine should run after starting. A parking‑meter countdown timer can be displayed on the transmitter’s LCD, providing real‑time feedback on remaining parking time. Single, double, or triple button presses trigger the start command, giving the driver flexibility in how they initiate the engine. All these modes are fully programmable via FlashLogic FLCART, allowing users to tailor the system to their daily routine. The transmitter’s illuminated entry feature ensures visibility in low‑light conditions, while the remote panic button remains available in every mode for added security. Users can set a parking‑meter countdown that displays on the LCD, letting them monitor remaining time without checking the dashboard. The illuminated entry light keeps the key fob visible in low light, while the remote panic button triggers a siren instantly. Dual‑stage shock sensors protect the vehicle from impacts, and the siren can be customized for alerts!!!
Installation Process
The Prestige APS997Z installation is straightforward. Mount the receiver in the dash, connect power, ground, and starter leads. Wire the antenna to the receiver, attach the transmitter to the steering column, then test the system. Check wiring before use! Now!!
Hardware Installation Steps
Begin by locating a suitable mounting area inside the vehicle’s dashboard, preferably near the steering column or center console. Remove the trim panel with a trim removal tool, taking care not to damage the surrounding plastic. Next, install the receiver unit onto the mounting bracket, ensuring it is firmly seated and aligned with the mounting holes. Connect the power lead to the vehicle’s 12‑volt source, using a fuse holder rated for the system’s current draw, and route the ground wire to a clean, unpainted metal surface. Wire the starter lead to the ignition switch, following the manufacturer’s wiring diagram to avoid interference with existing circuits. Attach the antenna cable to the receiver, then secure the glass‑mounted antenna to the vehicle’s exterior, aligning the built‑in LED with a visible location for easy status indication. Finally, mount the 5‑button transmitter to the steering column or a convenient spot on the dash, ensuring the button layout is accessible. Verify all connections, tighten all screws, and replace the trim panel. Perform a preliminary system check by powering on the vehicle and testing the transmitter’s response. If the system does not start, double‑check the wiring and consult the troubleshooting guide. Once confirmed, the hardware installation is complete, and the system is ready for programming and operation. The installer should also verify that the antenna is properly aligned with the vehicle’s exterior to maximize signal strength. After installation, run a series of test starts at various temperatures to ensure the cold‑start feature functions correctly. Document all wiring connections in a schematic for future reference. Ensure safety checks are done
After the receiver is mounted and wired, power the unit by inserting a fuse and connecting the ground to a clean metal point. Next, attach the antenna cable to the receiver and secure the glass‑mounted antenna to the vehicle’s exterior, ensuring the LED indicator is visible. Verify the power supply by checking the LED light; a steady amber glow confirms proper voltage. Use the 5‑button transmitter to issue a start command while the engine is off; the vehicle should cramp the engine and the LCD will display a confirmation. If the engine does not crank, double‑check the starter lead connection and confirm the ignition switch is in the correct position. For cold‑start functionality, lower the vehicle’s cabin temperature to below 40 °F (4 °C) and repeat the start test; the system should automatically engage the cold‑start mode and provide a smooth engine start. Test the 24‑hour start mode by setting the transmitter’s timer to a future hour, then verify that the vehicle starts automatically at the scheduled time. Additionally, press the panic button on the transmitter to confirm that the alarm siren activates and the vehicle’s lights flash, indicating the panic mode is active. Finally, inspect the antenna alignment by measuring signal strength with a diagnostic tool; adjust the antenna position if the signal drops below the recommended threshold. Record test results and anomalies in the log for troubleshooting!!!
System Programming and Control Options
Use the FlashLogic FLCART interface to program vehicle and transmitter settings. Configure user profiles, control outputs, and safety overrides. Set start modes, timer limits, and alarm parameters. Save and verify via the transmitter LCD confirmation. All settings are saved automatically.
FlashLogic FLCART Programming
The Prestige Auto Start System works with FlashLogic’s FLCART platform for precise vehicle integration. Connect the FLCART reader to the vehicle’s OBD‑II or telematics port, power it with a 12 V adapter, and launch the FLCART software. Select the “Prestige APS997Z” profile; the software will auto‑detect the VIN and firmware. In the “System Settings” tab, set 24‑hour, cold‑start, or auto‑start windows and define temperature thresholds. The “User Profiles” section lets you create up to two profiles, each with its own keycode and transmitter pairing. Enter the 6‑digit code shown on the LCD to lock a transmitter to a profile. The “Output Configuration” pane assigns the 11 NOC and 4 auxiliary outputs to vehicle functions such as engine start, door lock, or siren. After configuring, click “Write” to flash the new settings to the APS997Z module; The reader shows a progress bar and confirms completion. Run a “Self‑Test” from the software to verify all outputs, and use the “Reset” function if any issues arise. The FLCART interface logs all changes, providing an audit trail for maintenance and troubleshooting. The system also supports remote panic, valet lock, and intrusion alerts, which can be enabled via the same interface. Additionally, you can program the 11 NOC outputs to trigger auxiliary devices like a backup camera or a custom alarm. The FLCART software provides real‑time diagnostics, allowing you to monitor signal strength and error logs during installation. This ensures optimal performance and simplifies troubleshooting for technicians and future updates.!
User Profile Configuration
Prestige Auto Start System allows up to two user profiles, each with a unique 6‑digit code that locks the transmitter to that profile. To configure a profile, power the APS997Z module and connect the FlashLogic FLCART reader to the vehicle’s telematics port. Launch the FLCART software, select the APS997Z profile, and navigate to the “User Profiles” tab. Click “Add New Profile,” enter the desired profile name, and assign the transmitter’s code by pressing the code button on the LCD transmitter until the code appears on the screen. Once the code is captured, the software will lock the transmitter to that profile. Each profile can be customized with separate start modes (24‑hour, cold, auto), selectable run times, and unique safety settings such as remote panic or intrusion alerts. The “Output Configuration” pane allows the profile to control up to 11 NOC outputs and 4 auxiliary outputs, enabling functions like engine start, door lock, or a custom siren. After configuring, click “Write” to flash the settings to the module. The system will confirm successful programming and store the profile in non‑volatile memory, ensuring that each user’s preferences are retained across power cycles. For troubleshooting, the FLCART software logs all changes and can reset a profile to factory defaults if needed. This flexible user‑profile system provides a secure, personalized experience for each driver while maintaining full control over vehicle functions.
The system also supports a valet mode that can be assigned to a specific profile, automatically locking the doors and disabling the engine when the vehicle is parked. Users can also set a parking meter countdown timer on the LCD transmitter, which is linked to the profile’s start mode. The profile data is encrypted within the module, ensuring that only authorized transmitters can access the vehicle’s functions. During installation, technicians should verify that the transmitter’s battery is fully charged and that the LCD display shows the correct profile code. If a profile is lost or corrupted, the FLCART software offers a “Restore Default” option that clears all user data and returns the module to its factory state. Once restored, new profiles can be created from scratch, allowing for a clean configuration process. The user‑profile feature is ideal for fleet operators or households with multiple drivers, providing each driver with a tailored set of controls and security settings without compromising overall vehicle safety. All settings saved!!!!
Operational Modes and User Interaction
The system offers 24‑hour, cold, and auto start modes selectable via the transmitter’s LCD. Users can start the engine with single, double, or triple presses, and trigger remote panic. All modes support remote panic lock! and valet lock!!
Start Modes (24h, Cold, Auto)
The Prestige APS997Z system supports three distinct engine‑start modes, each tailored to specific driving scenarios and user preferences. The 24‑hour mode allows the vehicle to be started at any time within a 24‑hour window, ideal for daily commutes or unpredictable schedules. The cold‑temperature mode automatically detects ambient temperatures below a preset threshold and pre‑heats the engine before ignition, ensuring optimal performance in winter climates. The auto mode offers a two‑to‑four‑hour scheduling window, letting users set a start time that aligns with routine arrival times, such as work or school. Each mode can be selected via the transmitter’s LCD display, and the system confirms the chosen mode with a visual cue. The transmitter supports single, double, or triple‑press sequences to initiate the selected mode, providing flexibility for quick starts or more deliberate activation. Additionally, the system’s remote panic feature is active across all modes, allowing users to lock the vehicle and trigger the siren from a distance if needed. The combination of these modes delivers a versatile, user‑friendly experience that adapts to varying environmental conditions and daily routines. Users can schedule start times, logs activations for later review, ensuring transparency and security!!! The interface also supports voice prompts and can be paired with a mobile app for remote monitoring and firmware updates. Users can schedule start times, logs activations for later review, ensuring transparency and security!!!
Panic and Intrusion Alerts
The Prestige APS997Z system features a robust panic and intrusion alert system that enhances vehicle security. Pressing the panic button on the 2‑way LCD transmitter immediately locks all doors, activates a multi‑tone siren, and triggers flashing parking lights, providing audible and visual deterrence. This function works in all start modes—24‑hour, cold, and auto—ensuring emergency protection at any time. The intrusion alert monitors door and trunk sensors; if an unauthorized opening occurs while the system is armed, the siren sounds and a notification is sent to the user’s mobile device via the Carlink‑ready telematics port. The event is logged with time and location for later review. Users can adjust intrusion sensitivity through the FlashLogic FLCART interface, choosing between single‑sensor or multi‑sensor triggers. A valet mode temporarily disables the panic function to avoid accidental activation while a valet operates the vehicle, yet the intrusion detection remains active. The system’s integration of real‑time alerts, remote notifications, and customizable settings delivers a comprehensive security solution that protects the vehicle and occupants from theft and vandalism. By combining immediate panic response with continuous intrusion monitoring, the APS997Z offers peace of mind and user convenience, allowing quick activation from the transmitter or a smartphone app while maintaining background protection. The system also logs the number of panic activations and can be configured to send alerts to a designated security company if repeated incidents occur. Users appreciate the quick response and the system’s ability to keep them informed during an incident!